The Lenovo Vibe X3 Stock Firmware is now ready for download, and you can find it in the section below. We have the drivers and tools to flash the firmware on Lenovo devices using QFIL.
The Lenovo Vibe X3 is still in development, and you can find it on XDA and Lenovo Forums, respectively. If, on the other hand, you installed a custom ROM or attempted to flash a kernel and ended up with a bricked device, you’ve come to the correct spot. In this post, we will show you how to flash Lenovo Vibe X3 stock firmware using a PC.
The Lenovo Vibe X3, which was released in 2015, sports a 5.5-inch IPS LCD touchscreen with 16-million colours and a screen resolution of 1080 x 1920. The screen is covered by Corning Gorilla Glass 3 and has a 401 PPI density. The smartphone was launched with Android Lollipop 5.1 and can be updated to Android Nougat 7.1. It is powered by a Qualcomm MSM8992 Snapdragon 808 CPU and is available in two variants: 32GB 3GB RAM and 64GB 3GB RAM.
Stock Firmware for Lenovo Vibe X3
You must have necessary tools and drivers installed on your computer in order to flash the Lenovo Vibe X3 stock firmware. You must also have QPST installed on your computer in order to flash the stock firmware without difficulty. Remember that the ROM is available for both the X3C50 and X3C70 models and covers both Chinese and English language. So, without further ado, let us get started.
Download
Drivers and Tools
Download Qualcomm Dload Driver Download QPST-2.7.496
Lenovo Vibe P1 Firmware
| Android Version | Android 5.1.1 |
| UI Version | X3a40_USR_S122_1511021007 |
| Release Date | 10/11/2017 |
| Model | Lenovo Vibe X3 |
| Country | Global |
| Language | English and Chinese |
| Downloads | 10,000+ |
| File Size | 1.52GB |
| Type | QFIL |
| Android Version | Android 5.1.1 |
| UI Version | X3a40_USR_S217_1606231000 |
| Release Date | 05/01/2019 |
| Model | Lenovo Vibe X3 |
| Country | Global |
| Language | English and Chinese |
| Downloads | 10,000+ |
| File Size | 1.52GB |
| Type | QFIL |
Instructions
How to Setup Qualcomm USB Drivers and QPST
Before installing the drivers on your computer, make sure you’ve deactivated “driver signature enforcement,” like we did on the Lenovo Vibe P1. To turn it off, restart your computer by hitting the “shift” key on your keyboard, then go to Troubleshoot > Advanced settings > Startup Settings, and then click the Restart button. When the various choices are shown, hit F7 or the number “7” on your keyboard to choose “disable driver signature enforcement.”
After the computer has restarted, follow these steps to install the driver and tools.
- Step 1: Open the device management and install the Qualcomm_Dload_driver.rar file.
- Step 2: Unzip the QPST.2.7.rar archive and launch “setup.exe.”
- Step 3: Restart the computer.
How to Flash Stock Firmware on a Lenovo Vibe X3
- Step 1: Turn your Lenovo Vibe X3 off.
- Step 2: Press and hold the Volume Up button while connecting the device to your computer through the USB data cord.
- Step 3: Navigate to Device Manager on your PC and search for Qualcomm Lenovo HS-USB QDLoader 9008. (If the following device appears, the drivers have been successfully installed).
- Step 4: Next, unzip the stock ROM zip file that you downloaded onto your PC.
- Step 5: Go to C: Programme Files (x86)QualcommQPST and start QFIL.exe.
- Step 6: In the QFIL box, click “Browse” and go to “prog_emmc_firehose_89xx.mbn” in the extracted ROM folder.
- Step 7: Select “rawprogram0.xml” from the extracted ROM folder and click “Load XML.”
- Step 8: Press the Download button and wait for the procedure to finish.
- Step 9: When finished, your device will reboot.
The initial boot will take between 3 and 8 minutes, depending on the device’s age. After rebooting the system, continue the setup instructions, fully charge your smartphone, and update the programmes.
